Table of Contents
Advertisement
Viewing other pictures /
„Scrolling" in the memory
1. In normal review mode (see above) press the click wheel
(1.18).
• The rectangle showing the zoom level and position (4.17)
disappears.
2. You can then turn the click wheel to select the other pictures.
Turning to the left takes you to the pictures with lower num-
bers, turning to the right to those with higher numbers. After
the highest and lowest numbers, the series of pictures be -
gins again in an endless loop, which means you can reach all
pictures in either direction
• The picture and file numbers in the monitor change accord -
ingly.
FIRMWARE
UPDATE
48 / Viewing other pictures / "Scrolling" in the memory / Image review, zoom in / Selecting the amount of zoom in
Image review, zoom in
In normal review mode (see above), turning the click wheel
(1.18) to the right zooms in on a central section of the picture.
The more you turn the ring, the greater the enlargement and the
smaller the section area. The maximum enlargement is 1 pixel
on the monitor corresponding to 1 pixel in the picture.
• The rectangle inside the frame (4.1.7) in the bottom right cor-
ner of the monitor indicates approximately the enlargement
of the section shown.
Selecting the amount of zoom in
1. When zoomed in (see above), press the click wheel (1.18).
• The frame indicating the zoom amount and position (4.1.7)
includes an additional red horizontal double arrow to indi-
cate the direction of movement of the zoomed section. A
vertical double arrow also appears in the field next to but-
ton 1.24 to indicate the button function.
Notes:
• From an enlarged view, you can only select other pictures if
the Zoom Lock function is activated (see below).
• This function is also available in INFO review mode (4.2, see
p. 47).
Horizontal movement
2. You can turn the click wheel to move the zoomed area to the
left or the right.
• The rectangle moves in the frame (4.1.7) in the direction
you turn the wheel.
Vertical movement
2. Press and hold button 1.24.
• The red double arrow in the frame 4.17 moves to the vertical
position and the field with the white double arrow disappears.
3. Turning the click wheel moves the zoomed area up or down.
• The rectangle moves in the frame (4.1.7) according to the
direction you turn the wheel, left = up, right = down.
Advertisement
Table of Contents
