Normal Review 4.1; Info -Review 4.2; The Histogram; Picture Data Review 4.3 - Leica S2 Instructions Manual

Normal review 4.1

• To ensure that the pictures can be viewed properly in the
monitor, normal review only shows
- the information in the header (4.1.1 -4.1.6), and
- the field for specifying the amount of zoom in the bottom
right (4.17), which represents the approximate position and
size of the section displayed.
INFO-review 4.2
Instead of the full-screen image in normal review, the INFO
review allows you to display a range of additional image data
along with a histogram (see below) and a smaller picture.
Note:
You can use menu control to select different histogram variations
(see next section).
Calling up the function
1. Press any of the 4 buttons 1.20, 1.21, 1.23, or 1.24.
• The image field shows -for 5s - the 4 fields 4.1.9 – MENU,
4.1.10 – INFO, 4.1.11 – PROTECT and 4.1.12 – DELETE for
the button functions valid in this situation.
2. Press the INFO button.
• The additional information 4.2.1 -4.2.14 appears in the
image field (see p. 11).

The histogram

The LEICA S2 allows you to choose between four histogram
variations: Based on either the overall brightness or separately
for the three primary colors red/green/blue, optionally with or
without identification of the areas in the picture where no image
appears (clipping), because they are too bright (red) or too dark
(blue).
Setting the function
1. In the SETUP section of the menu (see p. 13/22), select
Histogram (5.24), and
2. select the desired function in the submenu: Standard with-
out clipping, Standard with clipping, RGB without clip-
ping, or RGB with clipping.
Note:
• The histogram display always refers to the section of the pic-
ture displayed at that time.
• The histogram is not available when simultaneously viewing
several smaller pictures (see p. 49).
FIRMWARE
UPDATE
Image data review 4.3
This view lists the settings used to produce the image previously
shown.
Calling up the function
1. In normal review mode (4.1) press any of the 4 buttons 1.20,
1.21, 1.23, or 1.24.
• The image field shows -for 5s - the 4 fields 4.1.9 – MENU,
4.1.10 – INFO, 4.1.11 – PROTECT and 4.1.12 – DELETE for
the button functions valid in this situation.
2. Press the MENU button.
• The image field shows the additional information 4.3.5 -
4.3.25 (see p. 12), and the button functions valid in this
situation in the 4 fields 4.3.1 – CAMERA, 4.3.2 – BACK,
4.3.3 – SETUP and 4.3.4 – PICTURE.
Normal review 4.1 / INFO review4.2 / The histogram / Image data review 4.3 / 47