Table of Contents
Advertisement
Image properties/Contrast, sharpness, color saturation
All three image properties can be adjusted – independently – to
three different levels using the menu control, so that you can
set the optimum values for any situation, i.e. the prevailing light -
ing conditions. In the case of Color Saturation, Black/White
can also be selected as a fourth option.
Note:
If the file format DNG is specified, these settings have no effect
as in this case the image data is always saved in its original form
(changes must be made later on the computer).
Setting the functions
1. In the IMAGE section of the menu (see p. 13/22), select
Contrast (5.14), Sharpness (5.15), or Saturation (5.16),
and
2. select the desired level (Low, Standard, High) in the relevant
submenu.
FIRMWARE
UPDATE
Working color space
The LEICA S2 permits allows you to set one of three color
spaces - sRGB, Adobe RGB or ECI RGB.
Setting the function
1. In the IMAGE section of the menu (see p. 13/22), select
Color Mangement (5.13), and
2. in the associated submenu select the desired function.
Storage of picture data / memory card management
If two memory cards are inserted (see p. 17), on the LEICA S2
you have the option of selecting,
– whether the picture data is to be stored on one of the two
cards first until its full capacity is reached and then on the
other card - Sequential, or
– always to both cards simultaneously - Parallel, or
– whether the picture data is to be transferred directly to a
computer connected by a cable - External.
Setting the function
1. In the SETUP section of the menu (see p. 13/22), select
Data Storage (5.17), and
2. in the associated submenu select the desired function.
Note:
If you have set Parallel and both file formats (see p. 28), the
DNG data is generally written to the CF card and the JPEG data
to the SD/SDHC card.
Image properties / Working color space / Storage of picture data / memory card management / 31
Advertisement
Table of Contents
