Menu Control / Settings Menu Control; Setting The Functions - Leica S2 Instructions Manual

Hide thumbs Also See for S2:
Table of Contents

Advertisement

Menu control/ Settings
Menu control
Most of the modes and settings on the LEICA S2 are operated
using menus. Navigating and making settings throughout the
menu is extremely quick and easy
1. The menu items are divided into logical functional groups
that are accessed directly.
2. Only a few controls are used.
3. Only a few operations are required in each case.
4. Each of three specified menu functions can also be called up
directly.
Calling up the menu
To call up the menu control and directly access the individual
screens, you use three (1.21, 1.23, 1.24) of the four buttons
located to the left and right of the monitor (1.22).
Note:
The four buttons - 1.20, 1.21, 1.23, 1.24 - are so-called "soft
keys", which means they have additional functions outside of
menu control, e.g. when reviewing pictures in the monitor.
Settings in the menu
All settings for the menu items are made using a single control -
the click wheel (1.18).
22 / Menu control
Exiting the menu
You can exit the menu in various ways:
- To switch to picture mode:
Tap the shutter release button (1.1)
- To switch to image data review mode (4.3, see also p. 12):
Briefly press button 1.20 in the menu –
in this case it is labeled BACK.
- To switch to play mode:
Briefly press button 1.20 while reviewing the picture data - in
this case it is labeled PLAY.
Menu function groups
The single menu on the LEICA S2 is divided into 3 function
groups marked in different colors (see also p. 13):
CAMERA (blue)
IMAGE (yellow)
SETUP (green)
The function groups are made up of 2 or 3 screens depending
on their scope. On each screen, the menu items appear on the
left on the individual lines, with the corresponding settings
alongside them on the right.
Navigating in the menu / Setting the functions
1. Call up the menu by briefly pressing any of the three buttons
1.21, 1.23 or 1.24 two or three times.
• If the monitor was previously inactive (dark), the first time
you press the button the image data review screen
appears, and the functions of the adjacent buttons are spec -
ified in the 4 fields 4.3.1 - 4.3.4: 1.24 – CAMERA, 1.20 –
PLAY, 1.23 - IMAGE, 1.21 – SETUP. For clarity, the three
buttons 1.24, 1.23 and 1.21 are marked in the same colors
as the corresponding sections of the menu.

Advertisement

Table of Contents
loading

Table of Contents