General; Language; Zone2 Setup / Zone3 Setup - Denon AVR-X4000 Owner's Manual

Contents

General

Make various other settings.

Language

Set the language for display on the menu screen.
English (Default) / Français / Español
%
• "Language" can also be set by the following procedure. However, the menu
screen is not displayed.
Following the display content to make the setting.
1. Press and hold the main unit's
"zVideo Format <NTSC>" appears on the display.
2. Press the main unit's i
.
"zGUI Language <ENGLISH>" appears on the display.
o p
3. Use the main unit's and set the language.
4. Press the main unit's ENTER to complete the setting.
Front panel Display
Connections Playback
o p
for at least 3 seconds.
Rear panel
Settings

ZONE2 Setup / ZONE3 Setup

Set the audio to play back with multi-zone (ZONE2, ZONE3).
%
• The setting values (dB) for "Volume Limit" and "Power On Volume" are what is
displayed when "Scale" (vpage 155) in the menu is set to "–79.5dB – 18.0dB".
2 Bass
Adjust bass tones.
–14dB – +14dB (Default : 0dB)
2 Treble
Adjust treble tones.
–14dB – +14dB (Default : 0dB)
2 High Pass Filter
Make settings for cutting the low range to reduce distortion in the bass.
On : The low range is attenuated.
Off (Default) : The low range is not attenuated.
193
Remote
Tips Appendix
Index