Denon AVR-X4000 Owner's Manual page 144

Contents
2 Speakers
Setting items
Audyssey ® Setup
Manual Setup
Amp Assign
Speaker Config.
Distances
Levels
Crossovers
Bass
Front Speaker Setup
2ch Playback
2 Network
Setting items
Information
IP Control
Friendly Name
Settings
Diagnostics
Maintenance Mode
Front panel Display
Connections Playback
The acoustic characteristics of the connected speakers and listening room are measured and the optimum settings are made
automatically.
Perform when setting the speakers manually or when changing settings made in Audyssey® Setup.
Select power amplifier usage method to match your speaker system.
Indicate speaker presence and select speaker size categories based on bass reproduction capability.
Set distance from listening position to speakers.
Set the volume of the test tone to be the same when it is output from each speaker.
Set the maximum frequency of the bass signal output from each channel to the subwoofer.
Set subwoofer and LFE signal range playback.
Set the front speakers to use for every sound mode.
Select the method for setting the speakers used in the 2-channel direct and stereo playback modes.
Display network information.
Enables network communication in standby power mode.
The Friendly Name is the name of this unit displayed on the network. You can change the Friendly Name according to your
preferences.
Make settings for wired LAN.
Used to check the network connection.
Use when receiving maintenance from a Denon service engineer or custom installer.
Rear panel
Settings
Description
Description
144
Remote
Tips Appendix
Index
Page
172
181
181
182
184
185
185
186
187
187
Page
189
189
189
190
191
192