Denon AVR-X4000 Owner's Manual page 145

Contents
2 General
Setting items
Language
ZONE2 Setup / ZONE3 Setup
Bass
Treble
High Pass Filter
Lch Level
Rch Level
Channel
HDMI Audio (ZONE2 only)
Volume Level
Volume Limit
Power On Volume
Mute Level
Zone Rename
Quick Select Names
Trigger Out 1 / Trigger Out 2
Auto Standby
Front Display
Front panel Display
Connections Playback
Sets the language for display the menu on the TV screen.
Makes settings for audio playback with multi-zone (ZONE2, ZONE3).
Adjust bass tones.
Adjust treble tones.
Make settings for cutting the low range to reduce distortion in the bass.
Adjust the left channel output level.
Adjust the right channel output level.
Set the signal output from multi-zone.
Selects the audio signal format for playing an HDMI source in ZONE2.
Set the volume output level.
Make a setting for maximum volume.
Define the volume setting that is active when the power is turned on.
Set the amount of attenuation when muting is on.
Change the display title of each zone to one you prefer.
Change the "Quick Select" display title to one you prefer.
Selects when to activate trigger out.
When you do not perform any operation on this unit with no audio or video input for a specified time, this unit automatically
enters the standby mode. Before it enters the standby mode, "Auto Standby" is displayed on the display of this unit and the
menu screen.
Makes settings related to the display on this unit.
Rear panel
Settings
Description
145
Remote
Tips Appendix
Index
Page
193
193
193
193
193
194
194
194
194
194
194
194
195
195
195
195
196
196