Firmware - Denon AVR-X4000 Owner's Manual

Contents

Firmware

Set whether or not to check for firmware update, update the firmware,
and display update and upgrade notifications.
2 Update
Update the firmware of the receiver.
Check for Update : Check for firmware updates. You can also check
approximately how long it will take to complete
an update.
Update Start : Execute the update process. When the update starts,
the menu screen is shut down. During the update, the
progress is shown on the display.
%
• If updating fails, the set automatically retries, but if updating is still not
possible, one of the messages shown below is displayed. If the display reads
as shown below, check the settings and network environment, then update
again.
Display
Updating fail Updating failed.
Login failed Failure to log into server.
Server is busy
Server is busy. Wait a while then try again.
Connection fail
Failure in connecting to server.
Download fail
Downloading of the firmware has failed.
Front panel Display
Connections Playback
Description
Rear panel
Settings
2 Notifications
When the latest firmware is available, a notification message is
displayed on the TV screen at power on.
Update
On (Default) : Display update message.
Off : Do not display update message.
Upgrade
The notification message is displayed for about 20 seconds when the
power is turned on. Connect to broadband Internet (vpage 50)
when using this function.
On (Default) : Display upgrade message.
Off : Do not display upgrade message.
199
Remote
Tips Appendix
Index