Denon AVR-X4000 Owner's Manual page 204

Contents
2 Registering by entering preset numbers
Before starting, confirm the preset number of the device that you want
to register and the buttons that can be registered in the Preset Code
Table (vpage 263) in the Appendix.
1
Press and hold down the input source button that you
want to register the preset code to and SETUP until the
DEV, TV and AVR indicators are flashing green.
2
Enter the preset number (5 digits) listed for the device in
the Preset Code Table using the number buttons (0 – 9)
on the remote control.
%
• Some manufacturers use more than one type of remote control code. Preset codes
to change the number and verify correct operation.
NOTE
• Depending on the model and year of manufacture of your device, some buttons
may not operate.
Front panel Display
Connections Playback
Rear panel
Settings
204
Remote
Tips Appendix
Index