Center Width; Delay Time; Effect Level - Denon AVR-X4000 Owner's Manual

Contents

2 Center Width

Distributes the dialogue output from the center channel to left and right
channels and widens the sound image in the front.
0 – 7 (Default : 3)
%
• You can set this when the sound mode is Dolby PLg/gx in the "Music" mode.
• The smaller the value, the more dialogue is concentrated on the center
channel. The larger the value, the more dialogue is distributed to front left and
right channels, and the more the sound image widens in the front.

2 Delay Time

Adjust the audio delay time against video to extend the sound field
image.
0ms – 300ms (Default : 30ms)
%
• You can set this when the sound mode is "MATRIX".

2 Effect Level

Adjust the sound effect level of the current sound mode.
1 – 15 (Default : 10)
%
• Set to a lower level if the positioning and sense of phase of the surround
signals seems unnatural.
Front panel Display
Connections Playback
Rear panel
Settings
2 Room Size
Determine size of acoustic environment. You can set this when the
sound mode is one of the original sound modes.
Small : Simulate acoustics of a small room.
Medium small : Simulate acoustics of a medium-small room.
Medium (Default) : Simulate acoustics of a medium room.
Medium large : Simulate acoustics of a medium-large room.
Large : Simulate acoustics of a large room.
%
• "Room Size" does not indicate the size of the room in which sources are
played.
2 Height Gain
Control the front height channel volume.
Low : Reduce the front height channel volume.
Normal (Default) : Front height channel sound is output with standard
sound volume.
High : Increase the front height channel volume.
%
• You can set this in the "PLgz" sound mode or when using the PLgz decoder.
153
Remote
Tips Appendix
Index