Search Bank Link - AOR AR8600 Operating Manual

To delete the entire contents of the current search pass list
"PASS 00 ----.----" confirms deletion. The search pass list may also be deleted using the DELETE
menu, refer to section 10-1 of this manual.
Adding new pass frequencies
Access the search pass list, If you are currently searching
, the "SRCH PASS" menu will be displayed
along with current bank letter. From any other point
, the VFO-PASS menu will be displayed,
to access the "SRCH PASS" menu, use the
keys at display the desired search bank letter.
the key to wrap around to the end of the pass
frequency list, the legend "PASS xx ----.----" will be displayed
where "xx" is the next available frequency pass channel. The
'dashes' indicate that the channel is currently unused.
Key in a frequency which you wish to skip during search of the
current bank using MHz format and ending with
the key and repeat the process if you wish to add
further frequencies to be skipped. To accept the data entry and
exit the menu
unwanted prior to searching, such as constant carriers etc.
Note: You may add frequencies in the range of 100 kHz to 2040 MHz via this menu but
only those within the current search limits will be acted upon.
It is also possible to delete the entire frequency pass list using the DELETE menu, refer to section 10-1
of this manual.

8-6 Search bank link

It is possible to custom define search parameters for a single bank or group of search banks.
Use the key sequence
Bank "SRCH GROUP 0" contains a default listing and cannot be overwritten (so displays "LINK OFF" on
the bottom line of the LCD), banks 1 to 9 are available for custom programming.
Use the main dial or
1 to 9 the legend "BANK LINK" will be displayed on the bottom line of the LCD indicating that
programming is possible.
to move to the search bank letters A - T and a - t, use the
and lower case letters.
. This facility is particularly useful if you know what frequencies are
keys to select the SEARCH GROUP number, for SEARCH GROUP numbers
, the legend
.
to access the "SRCH GROUP" menu.
keys to move between upper