Em8200 All-Data Save And Load - AOR AR8600 Operating Manual

If you do not format the memory, you will still be able to carry out SAVE ALL (item 1 in the table) but the
specific data saves (items 2, 3, 4, 5 & 6 will not operate). If you do not format the memory and later
attempt to use a specific memory save or load, an error beep will sound (if beep is enabled).
Register the EM8200 slot card
Insert the EM8200 slot card and switch the AR8600 on and REGISTER the EM8200 card via the
OPTION SELECT registration menu. Refer to section 18-2 and the example for the TE8200 shown
in section 18-3. Remember, the EM8200 is listed in group 2 of the slot card option list.
To use the EM8200
Insert the EM8200 slot card and switch the AR8600 on, select VFO mode.
to access the EM8200 menu. As the EM8200 has been registered, the RS232
COPY menu will not be displayed but the EM8200 will be displayed dynamically in its place.
Four significant lines of menu are displayed:
1 COPY EXT-MEM
2 LOAD SAVE 0
3 ALL-DATA
4 Next
First select the "SAVE" option,
Next select the EM8200 bank you wish to save, the first time
select "0" using the
select 1, 2 & 3 to fully format the EM8200). The type of data will
already be default to "ALL-DATA" so no action is required.
to start the data save. The legend "EXT-MEM
SAVING !!" will be displayed with the exclamation marks flashing
to indicate that saving is in progress. The save process will take
over 20 seconds to complete. Once the save is complete, the
LCD will revert to its previous display (VFO, scan or search etc).
Now repeat the ALL-DATA save to EM8200 locations 1, 2 and 3 to complete the formatting process.

18-7-2 EM8200 ALL-DATA save and load

Before loading data from the EM8200 it is recommended that ALL
DATA save be used to make a copy of the AR8600 into one of the
EM8200 memory locations (i.e. keep one as a temporary copy of
your current AR8600 data).
Save ALL-DATA
Access the COPY EXT-MEM menu using the key sequence
Indicates that the EM8200 COPY menu has been accessed
Select save to or load from the EM8200 and EM8200
bank number (0, 1, 2 & 3)
Type of data to be saved / loaded
Access to further menu items
keys or main dial, (later you will need to
.
to toggle between load and save.