Table of Contents
Advertisement
FRONT PANEL
From Top to Bottom:
V1 POE
V2 POE
LEDs: The table below describes the operating modes (Port LEDs are for power supply status only and
do NOT indicate link or activity):
Note: Redundant power inputs will not balance the power load. Only load from one power supply is used
at a time.
(Revised 2011-09-02)
Power LED
POE is being applied on the respective port with V1 as a valid source of power.
is being applied on the respective port with V2 as a valid source of power.
9
Advertisement
Table of Contents
