N-Tron 105TX-SL Instruction Sheet

Hide thumbs Also See for 105TX-SL:

Download this manual See also: User Manual and Installation Instructions

PACKAGE CONTENTS

One 105TX-SL unit

UNPACKING

Remove all the equipment form the packaging, and store the packaging in a safe place. File any

damage claims with the carrier.

APPLYING POWER (Top View)

Unscrew & Remove the DC Voltage Input Plug from the top header.

Install the DC Power Cables into the Plug (observing polarity on unit).

Plug the Voltage Input Plug back into the top header.

Tightening torque for the terminal block power plug is 0.5 Nm/0.368 Pound Foot.

All LED's will flash ON Momentarily.

Verify the Power LED stays ON (GREEN).

Note: Either V

power operation, V

Use wire sizes of 12-28 gauge. The power cord should be limited to less than 10 meters

in order to ensure optimum performance.

Recommended 24V DC Power Supplies, similar to:

100-240VAC:

N-Tron NTPS-24-1.3, DC 24V/1.3

To download the User Manual please visit the following location: www.n-tron.com/html/tech_docs.html

Rev. 061209

105TX-SL Instruction Sheet

or V

can be connected to power for minimal operation. For redundant

and V

plugs must be connected to separate DC Voltage sources.