Front Panel - N-Tron 500 Series Installation Manual

Front Panel

From Left to Right:
LNK Link LED for Fiber Optic Port (only FX/FXE models)
TX 100MB/s Fiber Optic TX Port (only FX/FXE models)
RX 100MB/s Fiber Optic RX Port (only FX/FXE models)
ACT Activity LED for Fiber Optic Port (only FX/FXE models)
RJ45 Ports Auto sensing 10/100 BaseTX Connections
Green LED lights when Power is connected
NOTE: Each RJ45 data port has two LED‟s located at the top or bottom of each connector. The left LED
indicates LINK status (green for 100Mb link, Orange for 10Mb link), and the right LED indicates
ACTIVITY (Green for Full Duplex activity, Orange for Half Duplex Activity).
LED‟s: The table below describes the operating modes:
LED Color
GREEN
OFF
GREEN
LNK
ORANGE
OFF
GREEN
ACT
ORANGE
OFF
(Revised 2011-07-13)
Description
Power is Applied
Power is OFF
100Mb Link between ports
10 Mb Link between ports
No Link between ports
Data is active between ports
and operating in full duplex
Data is active between ports
and operating in half duplex
Data is inactive between
ports
12