Step 8, Alternate Anti-Tip; Procedure - GE Monogram ZICP720 Installation Instructions Manual

Installation Instructions
_1 ALTERNATE ANTI-TIP PROCEDURE
The refrigerator must be secured to prevent tipping.
The anti-tip brackets cannot be used on metal
wall studs. Use this Alternate Procedure to secure
the refrigerator against tip-over whenever metal wall
studs are encountered and there is no soffit.
• Raise the grille panel to access case trim.
• Use a 3/16" bit to drill four evenly spaced clearance
holes through the metal top case trim.
• Use a 1/16" bit to drill pilot holes through the metal
clearance holes and into the wood soffit. The holes
should be centered in the soffit or a 3/4" min. wood
brace. The brace spanning the enclosure must be
securely fastened to cabinets on both sides.
• Install four 1-1/2" drywall screws into the pilot holes.
TopCase Trim
InstallFour1-1/2"Drywall S crews
Through TrimandIntoSoffitor
3/4"Min.WoodBrace
SideView
TopCase Trim
19] SECUREREFRIGERATOR T O CABINETRY
Whenever possible, perform this step for anti-tip II
security, or when anti-tip brackets cannot be used.
The refrigerator must be secured to prevent tipping.
• Raise the grille panel to access case trim.
• Drill hole in trim and drive screw through the trim -_
into adjacent cabinet.
,I
• Follow the same procedure on the opposite side.
DriveScrews Through
Case TrimandInto
AdjacentCabinets
11