Step 5, Install Anti-Tip Brackets - GE Monogram ZICP720 Installation Instructions Manual

Installation Instructions
151 INSTALL ANTI-TIP BRACKETS
WARNING: A.TI-TIP PRECAUTIO.S
The refrigerator is top-heavg and must be secured
to prevent the possibilitg of tipping forward.
ATTENTION : PRECAUTIONS CONTRE LES
BASCULEMENTS
Le r6frig6rateur est beaucoup plus Iourd en
haut et il faut le maintenir en place pour 6viter
la possibilit6 de son basculement vers I'avant.
• Cut a 2" x 4" x 71" block and secure the block
to the mounting brackets provided using #12
or #1/4 wood screws.
2x4Cut _,
71" Length
InstallationHeight Mounting
FromFloor Bracket
Screws Mounted into j
Vertical Wall Studs
• Secure the bracket with wood block to the back
wall so that it is 84" (or gour installation height)
from the finished floor. Use #12 or #1/4 wood
screws. See illustration.
Brackets
Required
B
Side View
Soffi[ Brackets
-- Not Required
-- Beneatha
Soffit
-I
[5] INSTALL ANTI-TIP BRACKETS (cont.)
• Screws must penetrate at least one inch into
vertical wall studs.
• Before pushing the refrigerator into the opening,
plug the power cord into the receptacle. Open the
grille panel and reach into the opening at the
back to grasp the power cord. Pull the power cord
into the opening as gou push the refrigerator back.
• Gentlg push refrigerator into the opening with
hands against front corners.
IMPORTANT NOTE: When the refrigerator is
installed under a soffit or if there is not enough
height for this method of security, brackets cannot
be used. Proceed to step 6 to level the refrigerator
and then to step 8 to secure refrigerator to
cabinets. The refrigerator must be secured
to prevent tipping.