Panel Indications & Controls - Zeta SP-64,126 User Manual, Maintenance Manual & Log Book

SIMPLICITY USER MANUAL, MAINTENANCE GUIDE & LOG BOOK
4. PANEL INDICATIONS & CONTROLS
PANEL INDICATIONS
The Simplicity has been designed to be as straight forward as possible. To help achieve this it has been designed so that
its LEDs are the primary display. Every possible fault has its own unique LED. Each LED is used to represent only one
condition.This helps avoid the confusion caused when a single LED is used for 2 or more conditions. The LCD is only used
during setup, and to give detailed information about zone faults.
PANEL CONTROLS
The controls on the Simplicity are grouped together to try to be as user friendly as possible. The Silence, Reset & Start/Stop
Sounder buttons are the main control buttons. The previous & Next buttons by the LCD are used to scroll between fault
messages. The next button is also used in the Device Status Menu.The General Test, Select & Confirm buttons are used to
control the one man test mode. The General Disablement, Select & Confirm buttons are used to select panel section
disablements. The numeric section is for entering access codes, and for entering device addresses. The alphabet keys are
used to enter device labels in the programming menu.
IN THE EVENT OF AN ALARM
After the site has been deemed safe for return, to return the panel to normal: -
1. Turn keyswitch to Controls access on position.
2. Press Stop/Start = turn off external sounders
3. Press Silence = turn off the panels buzzer
4. Record the LCD details in the Fire Alarm Log Book
5. Press Reset = return panel to normal condition.
Approved Document No: GLT.MAN-108
Issue: 2.00 Authorised: GH Date: 04/06/2007
PAGE 5