Training Settings - Garmin Forerunner 50 Owner's Manual

Training Settings

nOTE: Training settings
cannot be modified during
an active session in Train
mode.
1. On the Train page, press and
hold start/stop.
2. Press view
next setting. The following
settings can be modified:
• UNITS–change units to
miles or kilometers.
• PACE
pace in minutes per mile/
kilometer.
OR
SPEED
speed in miles/kilometers
per hour.
Forerunner 50 Owner's Manual
to advance to the
SHOW–display
SHOW–display
• AUTO–turn Auto Lap
or off. When AUTO
is ON, laps are triggered
by distance; you cannot
lap
use the button to
manually mark laps Press
view again to enter the
distance.
• ZONES–turn the training
zones on or off. See
Training Zones.
• PUSH CALIB–calibrate
the foot pod by running a
known distance, see
page 8.
• TxPAIR–see
• CALIB–enter a calibration
factor to adjust foot pod
calibration to a known
value. See page
• WHEEL–enter the wheel
circumference in mm
(GSC 10 required).
t m
raIn ode
on
®
lap
page 18.
8.