Carriage; Tailstock - Grizzly G0746 Owner's Manual

carriage

h
p
Q
figure 4. Carriage controls.
H. 4-Way Tool post: holds up to four different
types of tooling, making it quick and easy to
switch tool type for different types of turning
operations.
i. compound Rest Handwheel: Moves tool
toward and away from workpiece at preset
angle.
J. carriage Lock: secures carriage in place for
greater rigidity when it should not move.
K. feed Selection Lever: selects power feed
for carriage or cross slide.
L. Thread Dial: indicates when to engage the
half nut during inch threading operations.
M. Spindle Lever: starts, stops, and reverses
direction of spindle rotation.
N. feed Lever: Enables carriage for power feed
or threading operations.
O. One-Shot Oiler: pumps oil from apron res-
ervoir to lubricate carriage ways.
p. Half Nut Lever: Engages/disengages half
nut for threading operations.
Q. carriage Handwheel: Moves carriage along
the bed.
R. cross Slide Handwheel: Moves cross slide
toward and away from workpiece.
-6-
i
J
K
r
l
N
M
o

Tailstock

t
s
figure 5. additional tailstock controls.
X
figure 6. tailstock controls.
S. Quill: holds centers and tooling.
T. Quill Lock Lever: secures quill in position.
u. Tailstock Lock Lever: secures tailstock in
position along the bedway.
v. Graduated Scale: indicates quill movement
in increments of 0.001" with one full revolu-
tion equaling 0.200" of quill travel.
W. Quill Handwheel: Moves quill toward or
away from spindle.
X. Tailstock Offset Screws: adjusts tailstock
offset left or right from spindle centerline (1 of
2).
y. Offset Scale: indicates relative distance of
tailstock offset from spindle centerline.
Model G0746/G0749 (Mfg. Since 3/13)
W
V
U
y