Anchoring To Floor; Anchoring To Concrete Floors; Leveling - Grizzly G0746 Owner's Manual

Anchoring to floor

anchoring machinery to the floor prevents tipping
or shifting and reduces vibration that may occur
during operation, resulting in a machine that runs
slightly quieter and feels more solid.
if the machine will be installed in a commercial or
workplace setting, or if it is permanently connect-
ed (hardwired) to the power supply, local codes
may require that it be anchored to the floor.
if not required by any local codes, fastening the
machine to the floor is an optional step. if you
choose not to do this with your machine, we rec-
ommend placing it on machine mounts, as these
provide an easy method for leveling and they have
vibration-absorbing pads.

Anchoring to concrete floors

lag shield anchors with lag screws (see below)
are a popular way to anchor machinery to a con-
crete floor, because the anchors sit flush with the
floor surface, making it easy to unbolt and move
the machine later, if needed. however, anytime
local codes apply, you MUst follow the anchoring
methodology specified by the code.
Machine Base
Concrete
figure 17. popular method for anchoring
machinery to a concrete floor.
Model G0746/G0749 (Mfg. Since 3/13)
Lag Screw
Flat Washer
Lag Shield Anchor
Drilled Hole

Leveling

for accurate turning results and to prevent
warping the cast iron bed and ways, the
lathe bedways MuST be leveled from side-
to-side and from front-to-back on both ends.
Re-check the bedways 24 hours after
installation, two weeks after that, and then
annually to make sure they remain level.
leveling machinery helps precision components,
such as bedways, remain straight and flat during
the lifespan of the machine. Components on a
machine that is not level may slowly twist due to
the dynamic loads placed on the machine during
operation.
For best results, use a precision level that is at
least 12" long and sensitive enough to show a
distinct movement when a 0.003" shim (approxi-
mately the thickness of one sheet of standard
newspaper) is placed under one end of the level.
see the figure below for an example of a high
precision level offered by grizzly.
figure 18. Model h2683 precision level.
-25-