Table of Contents
Advertisement
6.8 DVR
- Manual Timer Record
This method can be used to record at specific times.
Press the
button on your STRONG remote.
Press the RED coloured key on your STRONG remote.
Use the
or
buttons to highlight a slot that is "OFF".
Press
on your STRONG remote to select this timer slot.
Use the
or
to change the "State" to how often you want the DVR to record at
the desired time (Once, Daily, Weekly, Mon-Fri or Series).
Use the
button to highlight the next option, and the
the setting for each option.
If you want the receiver to power off once the recording has finished, in the Power
Off section select Yes by pressing the
Once the last option is set and the
save?".
Use the
or
buttons to highlight Yes and press the
Press the
key twice to return to normal viewing.
2) Timer Lead In and Lead Out Times
Lead In and Lead Out Times can be set on your DVR to apply to all Timer recordings.
Lead In and Lead Out times add specified amounts of time to the beginning and the
end of Timer recordings so you dont miss the begining or end of recorded programs.
To set Lead In & Out times press
and select System Settings, then select Time
Settings. Then highlight Timer Lead Time and press the
set the Lead In & Out times to either 5,10 or 15minutes
or
buttons to change
or
arrow keys
button is pressed, you will see "Do you want to
button.
button. This will allow you to
49
6.8 DVR
3) Record on your STRONG SRT 7000 Digital Video Recorder using an external
HDD via USB
You can expand the storage capacity of your STRONG DVR by connecting an
external HDD via the front or rear USB ports
Before connecting the external HDD you will need to format the drive.
Instructions on how to do this can be found on our website www.strong.com.au
in the FAQ section.
To record to the external HDD you will need to select it in the Menu. Press the
button and using the
and
arrow buttons select Media Manager by pressing
button. This will display the Media Manager Menu. Using the
buttons select Disk Manager and press the
Manager Menu. The first item in the list is Default Disk. This will currently be displaying
/HDD0 which corresponds to the internal HDD. To set the default disk to your external
HDD press the
or
arrow buttons until /USB0 is displayed. This corresponds to your
external HDD. Once you have selected /HDD1 press the
prompted to save the changes made. Select Yes using the
and press the
button. The default disk is now set to the external HDD
You can now perform all the recording options listed above using the external HDD
To set the default HDD back to the internal drive simply remove the external HDD.
Should you wish to have the external drive permanantly connected follow the abve
instructions to select which HDD to record onto.
and
arrow
button. This will display the Disk
button, you will be
or
arrow button
50
Advertisement
Table of Contents
