Strong SRT 6100 User Manual page 13

6.2 System Setting
4) Front Display Setting
This function enables you to set the front display settings.
Moving text can be enabled or disabled and Channels can be set to display Channel
Name or Name and Numbers.
Use the scroll button to highlight and adjust your selection and press the
confirm. <Figure 6.2.4>
<Figure 6.2.4>
- Standby Mode (Selecting Power Saving or Normal)
Highlight standby mode using the
keys to adjust your selection.
Power Saving : Set Power Saving to ON using the left and right arrow keys for the
receiver to consume less power whilst in standby
Normal : Should you wish to access your televisions inbuilt tuner whilst your STRONG
DVR is in standby you will need to set the Standby Mode to Normal. Using
the / arrow keys set Standby Mode to Normal.
Press the button, you will be prompted whether you wish to save the settings select
Yes using the / arrow buttons and press the
button to
and arrow keys. Use the / arrow
button
21
6.2 System Setting
5) Security Settings
To prevent unauthorized access to classified programming, you can set a personal PIN
number for your receiver. (Note that the factory set default password is : 0000. PIN and
password are the same) <Figure 6.2.5>
By setting any of the following functions to
access them;
- Receiver Lock, Install Lock, Channel Lock, Lock Channel Confirm
Age Limit (Parental Lock)
Under this menu you may select a Rating of programs you choose to block.
All available ratings are listed in the menu and when the program information regarding
the rating available from the broadcaster exceeds the selection, a PIN number is
required to access the program.
Use the scroll buttons to make your selection and press
This section also contains options to change and enter new passwords.
<Figure 6.2.5>
in this menu, the PIN will be required to
button to confirm.
22