Table of Contents
Advertisement
6.3 Channels
7) Add Channels
This Submenu allows you to add channels.
Press on Add Channels. The following menu will be displayed. <Figure 6.3.8>
Press
/
to Change the parameter.
- Frequency : Select Frequency.
- Channel Name : Press to display Keypad pop-up; Edit a channels name.
- Channel Type : Select among TV / RADIO.
- You can add specific channel of the transponder by setting its PID data (Video, Audio and PCR).
- Video Type : Select the video type (MPEG1/2, H.264).
- Audio Type : Select the video type (MPEG1/2, HE-AAC, Dolby Digital(AC3), MPEG4, ACC,
Dolby Digital+(DD+)).
<Figure 6.3.8>
31
6.3 Channels
8) AV Input Channel
Your STRONG SRT7000 incorporates an AV Input feature that will allow you to record
from any external video source to the internal HDD, such as Pay TV, Gaming consoles,
Camcorders and many others
You can connect your external audio/video source either via Component or
Composite Video cables and Audio Left and Right RCA cables
To activate the AV In feature press
and press the
button. You will be prompted to enter your PIN (the default PIN
number is '0000') to access this menu.
Using the arrow buttons highlight AV In and press the
screen will be displayed
With AV Input highlighted, using the arrow buttons select ON
To set the Input Selection, use the arrow down button select Input Select, now using
the
/
arrow buttons select the appropriate connection type.
If you have connected your external video source via Component (Red, Green and
Blue RCA cables) select YCbCr
Video source must be set to 576i when connecting via component.
If you have connected your external video source via Composite (Yellow RCA cable)
select CVBS
Now press the
button, you will be prompted to save these settings. Using the
arrow buttons select Yes and press the
The AV Input channel will be added in the channel list at the last position.To access the
AV In channel press the AV IN button on the remote control. You can also access the
AV In channel by pressing the
and
press the
button to bring up the Channel List. And select AV In by pressing the
button.
, using the arrow buttons highlight Channels
button, the AV In menu
button.
buttons until it is displayed or alternatively
32
Advertisement
Table of Contents
