Strong SRT 6100 User Manual page 14

6.2 System Setting
6) Database Reset <Figure 6.2.6>
This section allows you to reset the receiver to the factory settings.
- Delete Radio Channels : Erase all radio channels in the database.
- Delete Scramble Channels : Erase all scramble channels in the database.
- Delete All Channels : Erase all channels.
- Factory Set : Erase all channels and restore the factory default settings.
Please note that a factory reset is required to be performed after a software upgrade
<Figure 6.2.6>
7) IP Setting
If the Network supports DHCP , IP settings can be allocated automatically. If the Network
does not support DHCP, the Addresses must enter manually (Static IP).<Figure 6.2.7>
- Connection Type: Ethernet or WiFi. Select Ethernet if you are connecting the receiver
to the network via a LAN cable. Select WiFi if you wish to connect to your home
wireless network using the wireless USB dongle supplied with your receiver. (Please
note the wireless USB dongle is already inserted into the rear USB port or the receiver)
- DHCP Usage : On/Off to receive IP settings automatically
- IP Address : Enter the IP address
- Subnet Mask : Enter Subnet Mask Number from your Network
- Gateway : Enter IP address of Gateway (e.g. router)
- DNS : Enter IP address of main DNS Server
- Mac Address : Mac Address display
23
6.2 System Setting
<Figure 6.2.7>
- SCAN : Press the RED button to SCAN for the IP address and network details
if they do not apprear automatically.
- WiFi Wi ard : When connecting to your home network using WiFi press the GREEN button to
z
view the list of available wireless networks. Select the desired wireless network you wish to
connect to using the and arrow buttons and press the
network.
- WiFi Setting : Once you have selected the wireless network you wish to connect to in the WiFi
Wizard press the YELLOW button to access the WiFi Setting menu. In this menu you can
enter the network key to connect to your wireless home network. HIghlight Key using the
and arrow buttons and press the
Using the , , and buttons select the characters of your wireless network security
and press the button. Once you have entered your wireless network key press the
button to save and exit. Now highlight connect and press the
wireless network.
- Firmware update : Support download from a LAN.
BLUE button, appear input target IP address.
RED button to Scan after inputting a target IP.
Choose a update software and button for downloading.
Note : The PC tool STB Daemon must be installed on your PC before you can connect
your receiver the PC. Please refer to the "Connecting your receiver via LAN to a
PC" section for PC Tool download instruction
<Figure 6.2.8>
button to select your
button to bring up the virtual keyboard.
button to connect to your
<Figure 6.2.9>
24