Strong SRT 6100 User Manual page 15

High definition digital terrestrial television receiver and recorder

Hide thumbs Also See for SRT 6100:

Table of Contents

Enlarged version

6.2 System Setting

Connecting your receiver to a PC via your Network

1. Follow these instructions prior to connecting your receiver to your PC:

a) Run the PC Tool program (STB Daemon) before connecting to your PC,

this can be downloaded from www.strong.com.au/faq tech. html.

b) Click Browse and select a sharing folder on your PC.

c) Press "

" then select STB Daemon and the window will be hidden. You can still see

the icon on bottom right of the windows screen.

2. Connect an Ethernet cable or wireless USB dongle from your DVR to your network port.

3. Press menu, Select System Settings, Select IP Settings:

a) Depending on your connection select either Ethernet of WiFi.

b) If your Network supports DHCP, IP settings can be allocated automatically by turning

DHCP Usage on and pressing the red colored key

6.2 System Setting

c) If your Network does not support DHCP, the IP Address must be entered manually

(Static IP). EG. If your computers IP is 192.168.168.114, you can allocate the unit an IP

of 192.168.168 any other number not used on your network.

d) Click the network icon on the bottom of your desktop.

e) Now select the Support Tab, you can allocate your IP Address.

4. You can now go into Media MAnager, then File Manager menu (on your DVR)

and press the yellow coloured key (on remote) to type in the OP address of the

computer which has STB Dadmon running.

Please see page 42 for instructions on how to transfer files.

Table of Contents

Srt 7000