Removing The Presser Foot; Attaching The Presser Foot; To Disengage The Upper Knife - Kenmore Sears 385.16644 Owner's Manual

Removing the presser foot
4, Raise the needle and presser foot,
Press the lever located on the back of the foot holder.
The presser foot will drop off.
,(1_Presser foot lifter
_ Needle
(_ Lever
Foot holder
Attaching the presser foot
Place the presser foot so that the pin on the foot lies just
under the groove of the foot holder. Lower the foot holder
to lock the foot in place.
Raise the presser foot lifter to check that the presser foot
is secure.
Q._Lever
(_ Groove
@ Pin
To disengage the upper knife
Turn off the power switch and unplug the machine.
4, Open the looper and side covers.
Turn the upper knife release knob toward you while
pushing it to the right, then guide the hole on upper
knife to the pin to lock the upper knife in the down
position.
_, Close the looper and side covers.
,_') Upper knife release knob
_) Stopper pin
(.3_ Upper knife
To activate the upper knife
Turn off the power switch and unplug the machine.
Open the looper and side covers.
Turn the upper knife release knob away from you while
pushing it to the right, then guide the groove on upper
knife to the pin to lock the upper knife in the up position.
Close the looper and side covers.
(_
Upper knife release knob
Stopper pin
\
/
J
/
/
J
I
3_
ii,<
60