Setting Spool Pin; Presser Foot Lifter; Thread Cutter; Pin - Kenmore Sears 385.12216 Owner's Manual

Setting Spool Pin
(_ Spool pin
The spool pins are used for holding the spools of
thread when feeding thread to the machine.
To use, pull up the spool pins. Push down for
storage.
t
Presser Foot Lifter
(_ Presser foot lifter
(&) Normal up position
(_ Highest position
The presser foot lifter raises and lowers your presser
foot°
You can raise it about 0.6 cm (1/4 _) higher than the
normal up position for easy removal of the presser
foot or to help you place heavy fabric under the foot_
Thread Cutter
0 Thread cutter
You do not need a pair of scissors to cut threads
after sewing° Just use the built-in thread cutter,
Accessory Box
Open the cover of the accessory box toward you°
Sewing accessories are conveniently located in the
box.
.J