Integrating With Microsoft Lync™ Server 2010 - Polycom IP5000 User Manual

®
User Guide for the Polycom
Integrating with Microsoft Lync™ Server 2010
48
®
SoundStation IP 5000 Phone
If enabled, a page will interrupt telephone calls and you'll be able to hear the
audio of both the telephone call and the page. The party on the other end of the
telephone call cannot hear the page unless that party has also enabled
Accept While Busy. If disabled, pages are placed on hold during an active call.
To hear the page, scroll to the page, and then press the Accept soft key.
To allow or disallow pages to play during an active call:
1. Press , and then select Settings > Basic > Preferences > Paging/PTT
Configuration > Group Paging.
2. From the Group Paging Configuration screen, scroll to
Accept While Busy, and then enable or disable the setting.
The default setting is Disabled. When enabled, your phone will accept
and play pages while you're in an active call. When disabled, your phone
won't play pages while you're in a call, but will hold them instead.
3. Press to save your change.
Your system administrator can configure your phone to work with
Microsoft Lync™ Server 2010 and communicate with others using
Microsoft Lync. From your phone, you can invite, join, control, and monitor
integrated multipoint audio conferences. For more information on using
Microsoft Lync with your phone, see
Server 2010 (Feature Profile
Technical Notifications
If your phone is set up to integrate with Microsoft Lync, your system
administrator has assigned you login credentials—a domain, user name, and
password—that your phone requires to access the feature.
If there is a problem with your login credentials, you won't be able to access
the feature on your phone. When your phone has incorrect login credentials,
the message Login credentials failed displays on the screen. You must re-submit
your login credentials.
To re-submit or enter your login credentials:
1. Press , and then select Settings > Basic > Login Credentials.
2. From the Login Credentials screen, enter a domain, user name, and
password, then press the Submit soft key.
If you log in to a phone that has the User Login feature enabled, and then want to
access features that require your login credentials, you'll need to re-enter your login
credentials so that the features will work.
Using Polycom Phones with Microsoft Lync
72430), available from the
Support Web page.
Feature Descriptions &