Symbols - Craftsman 315.114850 Operator's Manual

Important: Some of the following symbols may be used on your tool. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the tool better and safer.
SYMBOL NAME
V Volts
A Amperes
Hz Hertz
min Minutes
Alternating Current
--- Direct Current
n No Load Speed
0
.../min Revolutions or Reciprocation Per Minute
Safety Alert Symbol
Wet Conditions Alert
Hot Surface. Do Not Touch
The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and the
explanations with them, deserve your careful attention and understanding. The safety warnings do not by
themselves eliminate any danger. The instructions or warnings they give are not substitutes for proper accident
prevention measures.
SYMBOL MEANING
DANGER:
follow the safety precautions to reduce the risk of fire, electric shock and personal injury.
WARNING:
Always follow the safety precautions to reduce the risk of fire, electric shock and personal injury.
CAUTION:
yourself or to others. Always follow the safety precautions to reduce the risk of fire, electric shock and
personal injury.
NOTE:
Advises you of information or instructions vital to the operation or maintenance of the equipment.

SYMBOLS

Failure to obey a safety warning will result in serious injury to yourself or to others. Always
Failure to obey a safety warning can result in serious injury to yourself or to others.
Failure to obey a safety warning may result in property damage or personal injury to
DESIGNATION/EXPLANATION
Voltage
Current
Frequency (cycles per second)
Time
Type or a characteristic of current
Type or a characteristic of current
Rotational speed, at no load
Revolutions, strokes,
surface speed, orbits etc. per minute
Indicates danger, warning or caution.
It means attention!!! Your safety is
involved.
Do not expose to rain or use in damp
locations.
This decal indicates HOT SURFACE.
DO NOT TOUCH. Keep all body parts
away from all hot surfaces.
6