Download Print this page

Craftsman 315.114850 Operator's Manual

1/2 in., 19.2 volt cordless drill-driver variable speed / reversible.
Hide thumbs

Advertisement

Operator's Manual
1/2 in., 19.2 VOLT CORDLESS DRILL-DRIVER
Variable Speed / Reversible
Model No.
315.114850
WARNING:
To reduce the risk of
injury, the user must read and understand
the operator's manual before using this
product.
Customer Help Line: 1-800-932-3188
Sears, Roebuck and Co., 3333 Beverly Rd., Hoffman Estates, IL 60179 USA
Visit the Craftsman web page: www.sears.com/craftsman
983000-464
2-04
Save this manual for future reference

Advertisement

   Also See for Craftsman 315.114850

   Related Manuals for Craftsman 315.114850

   Summary of Contents for Craftsman 315.114850

  • Page 1

    Customer Help Line: 1-800-932-3188 Sears, Roebuck and Co., 3333 Beverly Rd., Hoffman Estates, IL 60179 USA Visit the Craftsman web page: www.sears.com/craftsman 983000-464 Save this manual for future reference 2-04...

  • Page 2: Table Of Contents

    FULL ONE YEAR WARRANTY ON CRAFTSMAN 1/2 in. CORDLESS DRILL-DRIVER If this CRAFTSMAN 1/2 in. Cordless Drill-Driver fails to give complete satisfaction within one year from the date of pur- chase, RETURN IT TO THE NEAREST SEARS STORE OR SEARS SERVICE CENTER IN THE UNITED STATES, and Sears will repair it, free of charge.

  • Page 3: General Safety Rules

    Do not use tool if switch does not turn it on or off. A tool that cannot be controlled with the switch is dan- MODEL BATTERY PACK CHARGER gerous and must be repaired. 315.114850 ITEM NO. 11375 ITEM NO. 11041 Disconnect battery pack from tool or place the switch...

  • Page 4: Specific Safety Rules

    GENERAL SAFETY RULES SERVICE n When servicing a tool, use only identical replacement parts. Follow instructions in the Maintenance section n Tool service must be performed only by qualified repair of this manual. Use of unauthorized parts or failure to personnel.

  • Page 5: Safety Instructions For Charger

    SAFETY INSTRUCTIONS FOR CHARGER WARNING! Read and understand all instructions. n Do not let gasoline, oils, petroleum-based products, etc. Failure to follow all instructions listed below, may come in contact with plastic parts. They contain chemicals result in electric shock, fire and/or serious peronal that can damage, weaken, or destroy plastic.

  • Page 6: Symbols

    SYMBOLS Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpreta- tion of these symbols will allow you to operate the tool better and safer. SYMBOL NAME DESIGNATION/EXPLANATION Volts Voltage Amperes Current Hertz...

  • Page 7

    SYMBOLS The following signal words and meanings are intended to explain the levels of risk associated with this product. SYMBOL SIGNAL MEANING DANGER: Indicates an imminently hazardous situation, which, if not avoided, will result in death or serious injury. WARNING: Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious injury.

  • Page 8: Features

    FEATURES SPECIFICATIONS Chuck ................................1/2 in. Keyless Motor ................................... 19.2 Volt DC Switch................................Variable Speed Gear Train ...................................2 Speed No Load Speed ............................0-400/0-1400/min. Clutch .................................. 24 Positions Charger Input ............................120 V. 60 Hz, AC only Charge Rate ................................. 1 Hour Torque..................................

  • Page 9

    FEATURES TWO-SPEED LEVEL GEAR TRAIN (HI-LO) TORQUE ADJUSTMENT RING KEYLESS CHUCK ® LEVEL REAR VIEW DIRECTION OF ROTATION SELECTOR (FORWARD/REVERSE) SWITCH TRIGGER STORAGE SCREWDRIVER BITS BATTERY PACK BATTERY PACK SHOWN IN CHARGER 4-1/2 IN. WRIST STRAP CHARGER RED LED ON INDICATES FAST CHARGING MODE GREEN LED ON AFTER FAST CHARGING CYCLE, INDICATES FULLY CHARGED BATTERYPACK AND...

  • Page 10: Unpacking

    UNPACKING INSTRUCTIONS PACKING LIST When unpacking the tool: 1/2 in. Drill n Carefully remove the tool and accessories from the 1 Hour Charger box. Battery Pack (2) n Make sure that all items listed in the packing list are Double-ended Bit (2) included.

  • Page 11: Operation

    OPERATION WARNING: LED FUNCTIONS OF CHARGER Do not allow familiarity with tools make you careless. Remember that a careless fraction of a LED WILL BE ON TO INDICATE STATUS OF second is sufficient to inflict severe injury. CHARGER AND BATTERY PACK: Red LED on = Fast charging mode.

  • Page 12

    OPERATION SWITCH TO INSTALL BATTERY PACK See Figure 2. n Lock switch trigger on your drill by placing the direction To turn your drill ON, depress the switch trigger. To turn it of rotation selector in center position. See Figure 5. OFF, release the switch trigger.

  • Page 13

    OPERATION SWITCH LOCK KEYLESS CHUCK See Figure 5. See Figure 6. The switch trigger can be locked in the OFF position. This Your drill has a keyless chuck. As the name implies, you feature can be used to prevent the possibility of accidental can hand tighten or release drill bits in the chuck jaws.

  • Page 14

    OPERATION INSTALLING BITS REMOVING BITS See Figure 7. See Figure 7. Lock the switch trigger by placing the direction of Lock the switch trigger by placing the direction of rotation selector in center position. See Figure 5. rotation selector in center position. See Figure 5. Open or close chuck jaws to a point where the open- Loosen the chuck jaws from drill bit.

  • Page 15

    OPERATION BIT STORAGE LEVEL See Figure 10. When not in use, bits provided with your drill can be placed in the storage area located on the bottom of your ® drill as shown in figure 10. SCREWDRIVER BIT STORAGE AREA Fig.

  • Page 16

    OPERATION CHUCK REMOVAL n Insert hex key in chuck and tighten chuck jaws se- curely. Tap sharply with a mallet in a counterclockwise See Figures 13, 14, and 15. direction. This will loosen chuck on the spindle. It can n Lock the switch trigger by placing the direction of rota- now be unscrewed by hand.

  • Page 17: Maintenance

    WARNING: When servicing, use only identical tool as well as workpiece. Craftsman replacement parts. Use of any other part may create a hazard or cause product damage. Only the parts shown on parts list, page 19, are intended to be repaired or replaced by the customer. All other parts Avoid using solvents when cleaning plastic parts.

  • Page 18

    NOTES...

  • Page 19: Exploded View And Repair Parts List

    CRAFTSMAN 1/2 in., 19.2 VOLT CORDLESS DRILL-DRIVER – MODEL NO. 315.114850 The model number will be found on a plate attached to the motor housing. Always mention the model number in all correspondence regarding your 1/2 in., 19.2 VOLT CORDLESS DRILL-DRIVER or when ordering repair parts.

  • Page 20: Parts Ordering / Service

    Get it fixed, at your home or ours! Your Home For repair – in your home – of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it! For the replacement parts, accessories and owner’s manuals that you need to do-it-yourself.

Comments to this Manuals

Symbols: 0
Latest comments: