4 Replacement Procedures
Installing the System Board
Install the touch pad according to the following procedures and figure 4-29.
1. Place the slider for the kill switch on the system board.
2. Seat the system board and secure it with two M2.5x4 black flat-head screws.
3. Connect the hotkey board SUMI-card to CN8 on the system board.
4. Seat the HDD tray and secure it with one M2.5x5 black flat-head screw.
5. Press the kill switch button through the opening in the side. Be sure the prongs are fully
engaged.
4-44
Equium A60/ Satellite A60/ Pro A60/ A65 Maintenance Manual
4.12 System Board