4 Replacement Procedures
Installing the System Board
Note: Be careful of the Kill switch knob position for the kill switch. It can be damaged
when installing the system board. Make sure its position is same as kill switch on system
board..
Install the System Board according to the following procedures and figure 4-21, 4-22 and
4-23.
1. Installing the system board for normal ODD type:
- Seat the system board in the correct position.
- Secure the system board with one M2.5x4 black flat-head screw and one M2.5x3.5
whit head flat screw.
2. Installing the system board for normal ODD type:
- Seat the system board in the correct position.
- Secure the system board with one M2.5x4 black flat head screw and one M2.5x3.5
whit head flat screw.
- Push the slot ODD to connect with system board then securing the slot ODD with
two M2.5x4 black flat head screws.
3. Installing the ODD bracket and secure it with M2.5x3.5 screw.
4-44
Satellite/Satellite Pro/A500/A505/A507/dynabook
4.16 System Board
Maintenance Manual