Toshiba A60 S1591 - Satellite - Celeron D 2.8 GHz Maintenance Manual page 165

4.3 HDD
4. Remove the HDD pack by pulling the HDD tap attached to the HDD pack.
NOTE: Do not disassemble the HDD pack when it is working normally. Disassemble or
replace the HDD pack only if it failed.
5. Place the HDD pack on a flat surface (such as a desk), and remove the two M3x4 black
flat-head screws.
6. Remove the HDD bracket.
CAUTION: Do not apply pressure to the top or bottom of the drive.
Equium A60/ Satellite A60/ Pro A60/ A65 Maintenance Manual
HDD pack
Figure 4-11 Removing the HDD pack
HDD
Figure 4-12 Removing the HDD chassis
4 Replacement Procedures
M3x4 black flat-head screw
HDD bracket
4-21