Procedure 4 Test Program Check - Toshiba A60 S1591 - Satellite - Celeron D 2.8 GHz Maintenance Manual

2.5 2.5-inch HDD

Procedure 4 Test Program Check

Run the HDD test program stored on the maintenance test program disk for all test items.
See Chapter 3 for details on how to use the test program.
If an error is detected during the HDD test, an error code and status will be displayed. The
error codes and their status names are listed in Table 2-1. If an error code is not generated
and the problem still exists, go to Procedure 5.
Code
1
Get Parameter Fail !
2 Read Old Data
Error
3 Write Pattern
Error
Read Back Data
4
Error
5
Data Compare Error
6 Restore Data
Error
7
Read Verify Error
9
Seek Error
10 Disk Controller Self Test Failed
11 Disk Controller Test unexpected interrupt Failed
12 Disk Controller action Test Failed
Disk dos not support
13
SMART
Disk read attribute threshold
14
error
15 Disk read attribute value error
16 Disk SMART attribute value error
Equium A60/Satellite A60/ Pro A60/A65 Maintenance Manual
Table 2- 1 HDD error code and status
Status
2 Troubleshooting
2-13