Toshiba A60 S1591 - Satellite - Celeron D 2.8 GHz Maintenance Manual page 183

4.10 Cooling Module
1. If silicon greases are already applied to the CPU and fan module, wipe them off with a cloth.
By using a special syringe, apply silicon greases to the CPU chip center so that the entire
CPU chip can be covered with the greases.
2. Place the cooling module in the correct position.
3. Secure the four screws on the cooling module using the numbered order shown on the
screws.
4. Secure one screw next to the fan.
5. Connect the cooling module cable to CN14 on the system board.
Equium A60/ Satellite A60/ Pro A60/ A65 Maintenance Manual
4 Replacement Procedures
4-39