Switch Cover And Hotkey Board - Toshiba A60 S1591 - Satellite - Celeron D 2.8 GHz Maintenance Manual

Maintenance manual
Hide thumbs Also See for A60 S1591 - Satellite - Celeron D 2.8 GHz:
Table of Contents

Advertisement

4.4 Switch Cover and Hotkey board

4.4
Switch Cover and Hotkey Board
Removing the Switcher
Remove the switch cover and hotkey board according to the following procedures and Figures 4-
13, 4-14.
1. Open the display panel.
2. Release the following 11 latches on the switch cover, in that order:
- Six bottom latches
- One latch on the left and right sides
- Three front latches
3. Remove the switch cover.
4. Disconnect the SUMI-card (flat cable) from CN2001 on hotkey board.
5.
Remove the two M2.5 x4 black flat-head screws for securing the hotkey board.
6.
Remove the hotkey board.
Equium A60/ Satellite A60/ Pro A60/ A65 Maintenance Manual
Latch
Figure 4-13 Removing the switch cover screw
4 Replacement Procedures
4-23

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents