Stopping/Restarting Your Washer - Kenmore One-speed automatic washers with water temperature control Owner's Manual And Installation Instructions

T
STARTING YOUR WASHER
1. Add measured detergent directly into
washer basket. Then place a load of
sorted clothes in the washer.
2. Close washer lid.
3. Set WATER LEVEL Control O based on
the size of your wash load.
4. Set the WATER TEMPERATURE
Control 0.
5. Push the Cycle Selector Control (Timer)
Knob _ in and tum to the right. Set
cycle and time according to the type of
fabric in the load.
6. Pull the Cycle Selector Control (Timer)
Knob _ out. The dial will rotate as the
cycle progresses. The knob will not
rotate.
STOPPING/RESTARTING
YOUR WASHER
• To stop the washer at any time, push
the Cycle Selector Control (Timer)
Knob in _.
• Pull the knob out to restart.
WATER LEVEL WATER _ERATURE
_.__ _°_° °_° ,_,
pERMANENT _£SS
16