Stopping/Restarting Your Washer - Kenmore One-Speed Automatic Washers Owner's Manual & Installation Instructions

STARTING YOUR WASHER
STEP 1. Add measured detergent
directly into washer basket. Then place
a load of sorted clothes in the washer.
STEP 2, Close washer lid.
STEP 3. Set WATER LEVEL Control O
based on the size of your wash load
(details on page 24).
STEP 4. Set the WATER TEMPERATURE
Control O (details on page 24).
STEP 5. Push the Cycle Selector Control
(Timer) Knob (_ in and turn to the right.
Set cycle and time according to the type
of fabric in the load (details on pages 25-26).
STEP 6. Pull the Cycle Selector Control
(Timer) Knob (_ out, The dial will rotate as
the cycle progresses. The knob will not
rotate.
STOPPING/RESTARTING
YOUR WASHER
• To stop the washer at any time, push
the Cycle Selector Control (Timer)
Knob in (_.
• Pull the knob out to restart.
f
J
imi'm
m,_mmm _mN m_m
23