Stopping/Restarting Your Washer - Kenmore Three-Speed Automatic Washers Owner's Manual & Installation Instructions

STARTING YOUR WASHER STEP 8. Set SPEEDS _) Control
according to the type of fabric in the
load (see page 26).
STEP 1. Place a load of sorted clothes
in the washer. Add measured detergent
directly into dispenser (details on page 31).
STEP 2. (OPTIONAL STEP) If desired, add
measured liquid chlorine bleach to the liquid
bleach dispenser (details on page 32),
STEP 3. (OPTIONAL STEP) If desired, add
measured liquid fabric softener to the fabric
softener dispenser (details on page 33).
STEP 4. Close washer lid.
STEP 5. Set WATER LEVEL Control O
based on the size of your wash load
(details on page 25).
STEP 6. Set the WATER TEMPERATURE
Control _ (see pages 25 and 26).
STEP 7. Set RINSE OPTIONS Control (_
(See page 28).
STEP 9. Push the Cycle Selector Control
(Timer) knob @ in and turn to the right to
desired setting (details on page 27-28).
STEP 10. Pul! the Cycle Selector ControI
(Timer) knob @ out. The dial will rotate
as the cycle progresses. The knob will
not rotate.
STOPPING/RESTARTING
YOUR WASHER
• To stop the washer at any time, push
the Cycle Selector Control (Timer)
knob @ in.
• Pull the knob out to restart.
WA_R LEVEL WATE_TEMP_RA_U_ f{_r_SE O P_Or_S SpE_US
24