Stopping/Restarting Your Washer - Kenmore Three-speed automatic washers Owner's Manual And Installation Instructions

STARTING YOUR WASHER
STEP 1, Add measured detergent
directly into washer basket. Then place
a load of sorted clothes in the washer.
STEP 2. (OPTIONAL STEP) If desired,
add measured liquid chlorine bleach to
the liquid bleach dispenser (details on
page 28).
STEP 3. (OPTIONAL STEP) If desired,
add measured liquid fabric softener to
the fabric softener dispenser (details on
page 29).
STEP 4, Close washer lid.
STEP 5. Set WATER LEVEL Control Q
based on the size of your wash load
(details on page 24).
STEP 6. Set the WATER TEMPERATURE
Control _) (details on page 24).
STEP 7. Push the Cycle Selector
Control (Timer) knob (_ in and turn to
the right to desired setting (details on
page 25).
STEP 8. Pull the Cycle Selector Control
(Timer) knob (_ out. The dial will rotate
as the cycle progresses. The knob will
not rotate.
STOPPING/RESTARTING
YOUR WASHER
• To stop the washer at any time, push
the Cycle Selector Control (Timer)
knob _ in.
• Pull the knob out to restart.
WA_Rb_VeL/ W4TeRr_e,_ERATUnE/
NtVEAUD'_AU teM_D_L'EAU
• TI, ,i,
,_ PERMANENT PRESS
, , ,_. _ DELICATE/
,, _E #CATS
LAVAG£AMMAtN 2_
23