Stopping/Restarting Your Washer - Kenmore Three-Speed with Options and Speeds Switch AUTOMATIC WASHERS Owner's Manual & Installation Instructions

STARTING YOUR WASHER
STEP 1. Add measured detergent
directly into washer basket. Then place
a load of sorted clothes in the washer.
STEP 2. (OPTIONAL STEP) If desired,
add measured liquid chlorine bleach to
the liquid bleach dispenser (see page 29).
STEP 3. (OPTIONAL STEP) If desired,
add measured liquid fabric softener
to the fabric softener dispenser (see
page 30).
STEP 4. Close washer lid.
STEP 5. Set WATER LEVEL Control O
based on the size of your wash load
(see page 24).
STEP 6. Set the WATER TEMPERA-
TURE Control O (see pages 24-25).
STEP 7. Set RINSE OPTIONS Control
O(see page 27).
STEP 8. Set SPEEDS Control
according to the type of fabric in the
load (see page 25).
STEP 9. Push the Cycle Selector
Control (Timer) knob _ and turn to
the right to desired setting (see page
26).
STEP 10. Pull the CyO Selector
Control (Timer) knob out. The dial will
rotate as the cycle progresses. The knob
will not rotate.
STOPPING/RESTARTING
YOUR WASHER
• To stop the washer at any time, push
the COe Selector Control (Timer)
knob in.
23