Kenmore Elite Ultra Wash 665.1628 Series Use And Care Manual page 11

TURBOZONE
TM
wash area
The TURBOZONE
TM
wash area is located at the back of the lower
dishrack.
NOTE: You must select the TURBOZONE
TM
wash option to utilize
this wash feature. Do not face items toward the rear of the unit if
you are not using this wash option.
TURBOZONE
TM
wash area
Load pans, casserole dishes, etc. in the back of the lower
dishrack with the soiled surfaces facing the TURBOZONE
TM
spray jets. Make sure items do not interfere with the water
feed tube or top spray arm.
Tip items toward the rear of the unit between the back two
rows of tines to maximize coverage.
IMPORTANT: Only one row of items may face the
TURBOZONE
TM
spray jets. Stacking, overlapping, or nesting
items will prevent the TURBOZONE
TM
spray jets from reaching
all of the surfaces.
TURBOZONE
TM
wash area side view
Suggested 10 place setting loading patterns
TURBOZONE
TM
10 place setting bottom rack load
Fold-down tines
You can fold down one row of tines at the back of the bottom
rack.
1. Grasp the tip of the tine that is in the tine holder.
2. Gently pull the tine out of the tine holder.
3. Lay the row of tines down in the rack to make room for larger
dishes, bowls, pots, pans or roasters.
Knife holder
Use the knife holder on the left side of the bottom rack to hold
knives that are too large for the silverware basket. Place knives in
the holder as shown.
TM TURBOZONE 10place setting top rack load
To remove the knife holder
1. Slide up to release the hooks over the rack wire.
2. Lift knife holder out of rack.
11