Table of Contents
Advertisement
Setting Surface Controls
Locations
of the Gas Surface
Burners
30" model:
The SIMMER burner is best used for simmering delicate
sauces, etc. This burner is located at the right rear burner
position on the cooktop.
The STANDARD sized burner are used for most surface
cooking needs. These burners are located at the left front
and left rear positions on the cooktop.
The POWER burner is best used for bringing large
quantities of liquid rapidly up to temperature or when
preparing larger quantities of food. This burner is located at
the right front position on the cooktop.
The BRIDGE burner is best suited when using rectangular
or long shaped cookware. The left rear and left middle are
combined and controlled by the same control knob. The left
front burner may also be added for a total of 3 burners.
36" model:
Your cooktop is equipped with gas surface burners
with different BTU ratings. The ability to heat food
quicker and in larger volumes increases as the
burner size increases.
The small SIMMER burner is best used for
simmering delicate sauces, etc. This burner is located
at the right rear burner position on the cooktop.
The STANDARD burners can be used for most
surface cooking needs. The 2 burners are located at
the left rear and center rear positions.
The POWER burner is best used for bringing large
quantities of liquid rapidly up to temperature or when
preparing larger quantities of food. The POWER
burners are located at the right front, center front and
left front burner positions.
Regardless of size, always select cookware that
is suitable for the amount and type of food being
prepared. Select a burner and flame size appropriate
to the pan. Never allow flames to extend beyond the
outer edge of the pan.
7
Advertisement
Table of Contents
