Troubleshooting - Garmin Forerunner 405CX Owner's Manual

Gps-enabled sports watch with wireless sync
Hide thumbs Also See for Forerunner 405CX:
Table of Contents

Advertisement

Appendix

Troubleshooting

Problem
The bezel is not
responding to my taps.
My Forerunner never
gets satellite signals.
The battery gauge
does not seem
accurate.
The heart rate monitor,
foot pod, or GSC 10
will not pair with the
Forerunner.
The heart rate data is
inaccurate.
The heart rate monitor
strap is too big.
Some of my data
is missing from my
Forerunner.
44
Solution/Answer
Unlock the bezel: press
firmly on the bezel for the best results. Tap the outer ring on
the bezel, not the inner ring near the watch face. Adjust the
sensitivity setting (see
Touch and hold
GPS.
Take your Forerunner outside and away from tall buildings.
Remain stationary for several minutes.
Allow the Forerunner to fully discharge, and then fully charge it
(without interrupting the charge cycle).
Stay 10 m away from other ANT+ accessories while pairing.
Bring the Forerunner within range (3 m) of the sensor while
pairing. Restart the scan for the accessory (see
sure the accessory is sending data (for example, you need to
be wearing the heart rate monitor). If the problem persists,
replace the battery in the accessory.
See
page
34.
A smaller elastic strap is sold separately. Go to
http://buy.garmin.com.
The Forerunner overwrites the oldest detailed data if you do
not transfer it to your computer. Transfer data regularly to avoid
losing data.
enter
and
quit
simultaneously
page
30).
Make sure
GPS
is set to On.
Forerunner 405CX Owner's Manual
.
Press
page
33). Make

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents