Configuring Cdp - Cisco Access Registrar 4.2 Configuring Network Settings

Chapter 4 Configuring Network Settings on the Cisco Unified IP Phone
Table 4-2 Network Settings (continued)
Network Setting
Operational VLAN
Id
Admin. VLAN Id
VLAN Enabled
CDP Enabled
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 4.2, Cisco Unified IP Phone
OL-8617-01
Description
Indicates the auxiliary Virtual Local Area
Network (VLAN) configured on a Cisco Catalyst
switch in which the phone is a member.
If the Admin. VLAN Id option is configured, the
Operational VLAN Id displays the administrative
VLAN.
If neither the auxiliary VLAN nor the
Administrative VLAN are configured, then the
Operational VLAN field is blank.
Indicates the administrative VLAN in which the
phone is a member.
Indicates whether VLAN is enabled for the phone. Displays Yes or No.
Indicates whether Cisco Discovery Protocol
(CDP) is enabled for the phone. CDP allows the
phone to be discovered by the CiscoWorks2000
network management system.
Verifying Network Settings
Usage Notes
Obtained via Cisco
Discovery Protocol (CDP)
from the switch to which the
phone is attached.
See the "Configuring VLAN
Settings" section on
page 4-26.
See the "Disabling VLAN"
section on page 4-27.
Displays Yes or No.
For more information about
CiscoWorks2000, refer to
the documentation available
at this URL:
http://www.cisco.com/
univercd/cc/td/doc/product/
rtrmgmt/cw2000/index.htm
See the

"Configuring CDP"

section on page 4-32.
4-9