Cisco Access Registrar 4.2 Configuring Network Settings page 10

Verifying Network Settings
Table 4-2 Network Settings (continued)
Network Setting
CallManager 1-4
Directories URL
Services URL
Authentication
URL
DHCP Enabled
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 4.2, Cisco Unified IP Phone
4-10
Description
Cisco Unified CallManager servers that are
available for processing calls from this phone, in
prioritized order. For an available server, an option
will show the Cisco Unified CallManager server
IP address and one of the following states:
Active—the Cisco Unified CallManager
•
server from which the phone is currently
receiving call-processing services.
Standby—the Cisco Unified CallManager
•
server to which the phone switches if the
current server goes down.
Blank—no TCP connection to this
•
Cisco Unified CallManager server.
An option may also include the SRST designation,
which indicates a Survivable Remote Site
Telephony router capable of providing
Cisco Unified CallManager functionality with a
limited feature set. This router assumes control of
call processing if all other Cisco Unified
CallManager servers become unreachable. The
SRST Cisco Unified CallManager always appears
last in the list of servers, even if it is active.
URL of the server from which the phone obtains
directory information.
URL of the server from which the phone obtains
Cisco Unified IP Phone services.
URL that the phone uses to validate requests made
to the phone web server.
Indicates whether DHCP is being used by the
phone.
Chapter 4 Configuring Network Settings on the Cisco Unified IP Phone
Usage Notes
Use Cisco Unified
CallManager
Administration to modify.
Configure the SRST router
address in the Device Pool
section in
Cisco Unified CallManager
Administration.
Use Cisco Unified
CallManager to modify.
Use Cisco Unified
CallManager to modify.
Use Cisco Unified
CallManager to modify.
See the "Modifying DHCP
Settings" section on
page 4-13.
OL-8617-01