ZyXEL P-330W User's Guide
Figure 30 Wireless Security Setup: WEP Encryption
The following table describes the wireless LAN security labels in this screen
Table 21 Wireless Security Setup: Static WEP Encryption
LABEL
Encryption
Set WEP Key
Use 802.1x
Authentication
WEP
Encryption
Authentication RADIUS Server
Port
IP Address
Password
Save
Reset
Click SET WEP KEY to configure WEP encryption.
57
DESCRIPTION
Choose WEP from the drop-down list box.
Click this to configure WEP without 802.1x.
Mark the check box here to use 802.1x authentication.
Select 64-bit WEP or 128-bit WEP. Used only when using 802.1x authentication.
The port number on the RADIUS server.
Enter the IP address of the RADIUS server.
Enter the password (shared secret) for the RADIUS server.
Click Save to save your changes back to the P-330W.
Click Reset to reload the previous configuration for this screen.
Chapter 5 Wireless