Drobo Roboticsl User Manual page 40

st nd
1 and 2 Generation Drobo
Q. Why does the Drobo 2
connect it to two computers at the same time via FireWire?
A. No. You cannot connect the Drobo to two computers at the same
time. The two FireWire ports are for daisy chaining devices only. If
you are connecting your Drobo to your Windows/Mac/Linux
computer using FireWire, the second connection can be used, for
example, to daisy chain another Drobo.
Q. Can I use two interfaces on my 2
time?
A. No. You can only use one Drobo interface connection to your
computer at a time. For example, if you plug both USB 2.0 and
FireWire 800 cables from the Drobo to your computer, Drobo will
select USB 2.0 by default, we recommend you never configure your
system in this manner.
If you do need to change to an alternate interface, safely shut down
your Drobo System by putting it into Standby first, then turning off
power. Change the interface cables on the Drobo system, then
power the Drobo system back up. If you are sharing your Drobo with
multiple computers, you do not have to use the same interface on
both computers, but you must power down the unit before switching
interfaces.
Q. How can I shut down Drobo safely for a prolonged period?
A. Click the "Standby" command from the Advanced Controls -> Tools
tab of Drobo Dashboard. The power light will turn orange once the
Drobo has safely entered standby mode. You can now safely
disconnect power and store Drobo for a prolonged period.
If you do not have access to Drobo Dashboard for any reason, then:
1. Turn off your computer and wait for power light to change
from green to orange.
2. Disconnect the USB or FireWire 800 cable and wait for power
light to change from green to orange.
3. Remove the power cable from the back of the Drobo.
nd
Generation have two FireWire ports? Can I
nd
Generation Drobo at the same
31