Table of Contents
Advertisement
3.2 LED indicators
LEDs
to
21
24
1.
Remaining backup time as a percentage (during normal
operation).
2.
Percentage of load drawn by the protected equipment, when
button
is pressed.
20
3.
Operating faults (alarmed by flashing LED and beep):
LED
21
22
23
24
Description of LEDs
for programmable outlets 1 and 2:
- OFF: The outlets are not supplied with power.
- Flashing: Status change in progress.
- ON: The outlets are supplied with power.
Outlets 1 and 2 can be remotely programmed and controlled.
They may be used for sequential start-up of the protected
applications, shedding of non-priority applications during operation on
battery power, and priority management at the end of battery backup
time to reserve the longest possible backup time for the most
sensitive applications. These outlets are programmed using
PowerPanel Business Edition Agent software.
provide three different indications:
Alarm Condition
Site wiring fault
Battery fault or end of life warning
UPS fault
Overload
and
17
18
indicator status
Operation 13
Advertisement
Table of Contents
